-
Out of stock
Call for price - Pre Order Product Jefacid is a liquid acidifier that removes mineral build up and lowers the pH level of the drinking water for livestock. Lowering the pH level also enables a more efficient chlorination process. This will result in good clean economical water which is vital for attaining optimal performance. The product is a blend of phosphoric, citric, lactic and malic acids. MSDS -
Out of stock
Call for price For the removal of organic soiling especially fats and greases. Biosolve™ Plus is ideal for the removal of fecal matter and soiling on swine, poultry, turkey farms, in the hatchery and animal confinement facilities. Biosolve™ PLUS will remove stubborn fats and grease from all processing equipment such as conveyor belts, separator machines, shackles and cutting blades.Directions For Use
Low or High Pressure Spraying: Prepare a stock solution of Biosolve™ PLUS 2-24 mL/liter (0.25-3.0 ounces per gallon), or calibrate your dosing equipment to achieve this dilution. Spray the solution onto all surfaces at an application rate of 500 mL/m2 (1.6 oz/ft2). Using hot water (60-65°C/140-149°F) will improve the effectiveness of the product, particularly in high grease situations. Allow contact time of 5-10 minutes before thoroughly rinsing all surfaces with clean water at high pressure. Foaming: Prepare a 8-24 mL/liter (1-3 ounces per gallon) stock solution of Biosolve™ PLUS, or calibrate your dosing equipment to achieve this dilution. Apply using a foam lance onto all surfaces at an application rate of 250 mL/m2 (0.8 oz/ft2). Allow a contact time of 5-10 minutes before thoroughly rinsing all surfaces with clean water at high pressure. Food & Egg Processing Equipment, Utensils and Other Food Contact Surfaces: Follow foam cleaning instructions. Thoroughly rinse cleaned surfaces with potable water before they are reused. Where recommended or permitted, apply a sanitizer solution to food contact surfaces before reuse. Recommended Dilution Rates ● Heavy soiling: 16 - 24 mL / L (2.0 - 3.0 ounces per gallon) ● Medium soiling: 8 - 16 mL / L (1.0 - 2.0 ounces per gallon) ● Light soiling: 2.0 - 8.0 mL / L (0.25 - 1.0 ounce per gallon)Storage And Disposal
Store in original container, in areas inaccessible to children. Keep container tightly closed. Do not store on side. Avoid creasing or impacting of side walls. Do not reuse empty container. Discard in trash or recycle. MSDS -
Out of stock
Call for price Jefacid is a liquid acidifier that removes mineral build up and lowers the pH level of the drinking water for livestock. Lowering the pH level also enables a more efficient chlorination process. This will result in good clean economical water which is vital for attaining optimal performance. The product is a blend of phosphoric, citric, lactic and malic acids. MSDS -
Virocid is a highly concentrated and broad spectrum disinfectant for use in food processing establishments, slaughter houses and livestock industries. Virocid is effective against: viruses, bacteria and fungi. Effective at rates as low as 0.25% (1:400). DIN 02239726 Active IngredientsAlkyl (40% C12, 50% C14, 10% C16) dimethyl benzyl ammonium chloride 17.06% Didecyl dimethyl ammonium chloride 7.80% Glutaraldehyde 10.725% Directions For Use
To disinfect hard non-porous surfaces (livestock equipment, floors, walls, table tops, counter tops), apply a 0.25% (1:400) solution to thoroughly wet surface. Spray the surface and let stand for 10 minutes. Virocid is a concentrate that can be used with a mop and bucket, trigger sprayers, sponge, or by soaking. Heavily soiled surfaces should be precleaned prior to disinfection. All food contact surfaces must be thoroughly rinsed with potable water after disinfection.Storage
Store in original container, in a dry, cool place. Do not store in food processing environments.Disposal
1. Rinse the emptied container thoroughly and add the rinsings to the treatment site. 2. Follow local instructions for any required additional cleaning of the container prior to disposal. 3. Make the empty container unsuitable for further use. 4. Disposal of product and packaging: The product and packaging must be disposed of in accordance with local requirements.Precautions
KEEP OUT OF REACH OF CHILDREN. Danger - Corrosive to eyes. Do not get in eyes, on skin or clothing. Use appropriate clothes, gloves and eye protection. Harmful if swallowed. Avoid contamination of food.First Aid
In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. For eyes, call a physician. Remove and wash contaminated clothing before reuse. If inhaled, breathe fresh air and consult a physician. If swallowed, do NOT induce vomiting. Call a physician or poison control centre immediately. MSDS -
Virkon™ is a disinfectant, possessing wide spectrum virucidal, bactericidal and fungicidal activity. The effectiveness of Virkon™ is further enhanced by its excellent detergent properties, so that clean disease-free surfaces can be achieved. Virkon™ is unique in its composition. Its activity is based on a buffered synergized acid peroxygen system containing a high percentage of surfactant. Virkon™ can be used on all surfaces and in all situations. Once diluted in a 1% solution, Virkon™ is of low toxicity, non-tainting, and non-irritant. Because of its high detergency and mode of action, Virkon™ can be used in an exceptional variety of situations for effective cleaning and virucidal disinfection in a single operation. Virkon™ can be applied manually or through all types of cleaning and spraying equipment. Readily soluble in lukewarm water giving a clear pink solution. Virkon™ consists mainly of inorganic salts. DIN 02125021 Active IngredientsPotassium monopersulfate 21.4% W/W Directions For Use
In agricultural buildings: animals must be removed from the premise during disinfection. In food processing plants: for food contact surfaces, rinse thoroughly with potable water after disinfection. 1. FOR CLEANING AND DISINFECTION OF SURFACES AND EQUIPMENT: In agricultural buildings Remove all animals from premises. Remove all litter and manure from floors, walls, and other surfaces of barns and equipment. Brush and blow dust from fans, motors, louvers and electrical equipment. For terminal cleaning and disinfection, saturate all surfaces with a 1% w/v solution of Virkon™, using a pressure washer or a fogger. Virkon™ should remain in contact with the surface to be disinfected for at least 10 minutes. Scrub heavily soiled utensils and soak in a 1% w/v solution of Virkon™ for 10 minutes (do not exceed 30 minutes for metal objects). In veterinary hospitals Remove heavy soil deposits then thoroughly wet surfaces to be disinfected with a 1% w/v solution of Virkon™, using a mop, sponge or cloth, as well as by spraying. A minimum contact time of 10 minutes is required. For laboratory equipment and bowls, scrub heavily soiled utensils and soak in a 1% w/v solution of Virkon™ for a minimum of 10 minutes (do not exceed 30 minutes for metal objects). IMPORTANT NOTE: In animal premises where there has been a disease outbreak and/or the mortality/morbidity rates are higher than normal and the causative agent has been determined by a pathology laboratory to be one of those listed in Table 1, the contact time/dilution rate indicated should be used. In food processing plants Remove all debris and other deposits from surfaces. Then, thoroughly wet surfaces to be disinfected with a 1% w/v solution of Virkon™, using a mop, sponge or cloth, as well as by spraying. A minimum contact time of 10 minutes is required. For food contact surfaces, rinse thoroughly with potable water after treatment with Virkon™. For a complete listing of microorganisms against which Virkon™ is effective, refer to the Efficacy Charts 2, 3, and 4. 2. FOR AERIAL DISINFECTION: To replace dangerous and ineffective formalin fumigation in empty farm buildings and veterinary hospitals. Shutdown the ventilation system during the disinfection. Use a mechanical fogging machine as part of terminal disinfection routine with a 1% w/v solution of Virkon™. Apply at a rate of one litre of solution per 100 m3 with particle size not exceeding 70 microns in order to get a minimal contact time of 10 minutes with microorganisms in the air. Leave the room during the fogging. Users and animals may re-enter the treated area once the fog has dispersed. No rinsing is required after fogging. 3. SANITIZING DRINKING WATER SYSTEM: For sanitizing drinking water system at terminal clean out, use a 1.0% w/v solution of Virkon™. Dose header tank and drain system. Wait at least 10 minutes before draining again. DILUTION INSTRUCTIONS1) Select the quantity of disinfectant solution required. 2) Choose appropriate dilution rate. 3) Measure out the amount of Virkon™ indicated using the graduated measuring scoop provided. 4) Add Virkon™ to warm water and stir. There is a 20% loss of activity of 1% solutions of Virkon™ after 14 days in 350 ppm hard water.Dilution rate required (w/v) Quantity of disinfectant solution required 3.0% 2.0% 1.0% 0.5% 0.2% Quantity of Virkon™ required 30 g 20 g 10 g 5 g 2 g 1 Litre 150 g 100 g 50 g 25 g 10 g 5 Litres 300 g 200 g 100 g 50 g 20 g 10 Litres 750 g 500 g 250 g 125 g 50 g 25 Litres Storage
Store between 15°C and 25°C in a dry place in tightly sealed containers.Disposal
1) Rinse the emptied container thoroughly and add the rinsings to treatment site. 2) Follow provincial instructions for any required additional cleaning of the container prior to its disposal. 3) Make the empty container unsuitable for further use. 4) Dispose of the container in accordance with provincial requirements. 5) For information on the disposal of unused, unwanted product and the cleanup of spills, contact the Provincial Regulatory Agency or the Manufacturer.Precautions
Keep out of reach of children. Powder irritating to eyes, skin and mucous membranes. May be harmful if swallowed or inhaled. Do not get powder in eyes. Avoid contact of powder with skin. Handle in such a way as to minimize dust release. Do not mix with other chemicals. When mixing the solution, wear goggles, chemical-resistant gloves, and a mask. It is recommended that workers wear overalls, goggles and a mask when applying Virkon™ solution with a hand-held fogger or a pressure washer.First Aid
Eyes: Irrigate with plenty of water. Skin: When in powder, remove contaminated clothing. Wash with soap and water. Not hazardous when in solution. Ingestion: When in powder, wash mouth with plenty of water. Drink plenty of water. Do not induce vomiting. Seek medical advice. If in solution, rinse mouth out with water. Inhalation: When in powder, if symptoms of coughing, choking, wheezing are troublesome, remove to fresh air and seek medical advice. MSDS -
The Quick-Mix pump is designed to accurately dose disinfectants through your water lines. The unique injection system makes it easy to dose disinfectants at 2 or 3% without having to worry about harsh chemicals wrecking diaphragms. To change the dilution ratio simply change the metering tip to the desired strength. Comes with tips for Proxy-Clean, Hyperox, Virocid and many other disinfectants. The quick-Mix is a wall mounted, push button dispenser.- Ideal for cleaning waterlines between flocks
- Garden hose connection
- Twist Lock
- Compatible with most common chemicals
- No power needed
- No Diaphragms
- Affordable, low maintenance unit
- Flow Rate - requires at least (3.5GPM)
- Compatible with chlorine, Hydrogen peroxide & more.
-
Hombre mini blocks are an ideal choice as the foundation for biosecurity rodent control programs. Formulated with Difethialone, a single feed, second-generation anticoagulant. Mice, roof rats and Norway rats are readily attracted to Hombre mini blocks. Blocks are designed with a center hole for securing to prevent rodents from translocating rodenticide into sensitive areas. MSDS -
A water soluble multi-vitamin and electrolyte mixture for chickens, turkeys, swine, cattle, sheep and horses. This treatment applies to the following species: -Beef Cattle, Chickens, Dairy Cattle, Horses, Sheep, Swine, Turkeys DIN 02122022 Active Ingredients (per 400g)Vitamin A (Vitamin A acetate) 1 280 000 I.U. Vitamin D3 (Cholecalciferol) 1 000 000 I.U. Vitamin E (Dl-alpha-tocopheryl acetate) 1 500 I.U. Vitamin B12 2560 mcg Folic acid 150 mg Menadione (Menadione sodium bisulfite) 500 mg Calcium-d-pantothenate 3200 mg Niacinamide 6720 mg Riboflavin 1280 mg Choline bitartrate 5760 mg Sodium chloride 277.71 g Sodium acetate 35.71 g Sodium diacetate 7.14 g (Total sodium eq. 120.58 g) Potassium chloride (Potassium eq. 7.48 g) 14.28 g Magnesium chloride (Magnesium eq. 1.82 g) 7.14 g Calcium acetate (Calcium eq. 1.81 g) 7.14 g Directions for Use
Chickens, turkeys, swine, cattle, sheep and horses: - As an aid in stimulating appetite during periods of stress caused by disease, moving, crowding, vaccination, castration or weather. - As an aid in preventing vitamin deficiencies when birds or animals are off normal feed. - As an aid in correcting dehydration and electrolyte imbalance during periods of severe stress, scouring or other enteric diseases that may cause dehydration. - As an aid in recovering from the stress effects of parasites, such as coccidia or intestinal worms. DOSAGE (In drinking water): Chickens, turkeys, swine, cattle, sheep and horses: Dissolve 400 g (1 pouch) of powder in 750 L of drinking water. Treat for 5 days or until feed consumption returns to normal and the effects of dehydration disappear. For automatic proportioner: Set the apparatus to distribute 30 mL per 4 L of water (1 oz./gallon U.S.). Prepare the stock solution by dissolving 400 g (1 pouch) of powder in 5.6 L of water. This will medicate 750 L of drinking water. For continuous low level supplementation of normal diet: Dissolve 400 g (1 pouch) of powder in 2250 L of drinking water. For automatic proportioner: Set the apparatus to distribute 30 mL per 4 L of drinking water (1 oz./gallon U.S.). Prepare the stock solution by dissolving 400 g (1 pouch) of powder in 17 L of water. This will medicate 2250 L of drinking water.Storage
Store between 15°C and 25°C. Protect from moisture. Keep hermetically closed when not used. Keep pail tightly closed when not used.Notes
Prepare fresh solutions daily and mix only the amount that will be consumed in a 24-hour period. Use as the only source of drinking water. 1 teaspoonful equals 5 g. The measuring cup contained herein (10 kg), when filled with a level quantity provides approximately 200 g of product. Net Weight 10kg pail -
Measures water quality quickly and easily. Simultaneously measures temperature and pH. -
Ultra foaming strong alkaline cleaner. Suitable for agricultural and horticultural use. Strong adhesion power and deep cleaning combine with dissolving power for use in pig, poultry (turkey rearing houses), and dairy houses. This cleaner can also be used for nonporous food contact surfaces in food processing establishments. Apply with normal dosing or Foaming equipment.Directions for Use
- Apply at 1oz / gal - 1 1/2 oz / gal with a foam lance and high pressure (min 600 psi)
- Let the product stick for min 20 min and rinse
- Let dry before applying disinfectant
-
For the removal of organic soiling especially fats and greases. Biosolve™ Plus is ideal for the removal of fecal matter and soiling on swine, poultry, turkey farms, in the hatchery and animal confinement facilities. Biosolve™ PLUS will remove stubborn fats and grease from all processing equipment such as conveyor belts, separator machines, shackles and cutting blades.Directions For Use
Low or High Pressure Spraying: Prepare a stock solution of Biosolve™ PLUS 2-24 mL/liter (0.25-3.0 ounces per gallon), or calibrate your dosing equipment to achieve this dilution. Spray the solution onto all surfaces at an application rate of 500 mL/m2 (1.6 oz/ft2). Using hot water (60-65°C/140-149°F) will improve the effectiveness of the product, particularly in high grease situations. Allow contact time of 5-10 minutes before thoroughly rinsing all surfaces with clean water at high pressure. Foaming: Prepare a 8-24 mL/liter (1-3 ounces per gallon) stock solution of Biosolve™ PLUS, or calibrate your dosing equipment to achieve this dilution. Apply using a foam lance onto all surfaces at an application rate of 250 mL/m2 (0.8 oz/ft2). Allow a contact time of 5-10 minutes before thoroughly rinsing all surfaces with clean water at high pressure. Food & Egg Processing Equipment, Utensils and Other Food Contact Surfaces: Follow foam cleaning instructions. Thoroughly rinse cleaned surfaces with potable water before they are reused. Where recommended or permitted, apply a sanitizer solution to food contact surfaces before reuse. Recommended Dilution Rates ● Heavy soiling: 16 - 24 mL / L (2.0 - 3.0 ounces per gallon) ● Medium soiling: 8 - 16 mL / L (1.0 - 2.0 ounces per gallon) ● Light soiling: 2.0 - 8.0 mL / L (0.25 - 1.0 ounce per gallon)Storage And Disposal
Store in original container, in areas inaccessible to children. Keep container tightly closed. Do not store on side. Avoid creasing or impacting of side walls. Do not reuse empty container. Discard in trash or recycle. MSDS -
This treatment applies to the following species: -Chickens -Turkeys CFIA Registration No T983937Guaranteed Analysis:
Copper (min) 12.9 %, Sulfur (min) 6 %, Lead (max) 10.2 mg/kg, Arsenic (max) 4.1 mg/kg, Iron (max) 255 mg/kgList of Ingredients:
Cupric Sulfate (as pentahydrate), USP, 51% w/w, Citric AcidDirections for Use
Dissolve 500 g in 4L of drinking water as a premix (stock) solution. Then give this premix at the rate of 30 mL per 9L of water. Period of use as directed by a veterinarian. Prepare fresh solutions daily.Storage
Keep in a cool dry place. Store below 25 ˚C. Keep from freezing.Caution
Mix thoroughly. Only use according to instructions. Wear protective clothing when handling. Net Weight 10kg pail -
Virkon™ is a disinfectant, possessing wide spectrum virucidal, bactericidal and fungicidal activity. The effectiveness of Virkon™ is further enhanced by its excellent detergent properties, so that clean disease-free surfaces can be achieved. Virkon™ is unique in its composition. Its activity is based on a buffered synergized acid peroxygen system containing a high percentage of surfactant. Virkon™ can be used on all surfaces and in all situations. Once diluted in a 1% solution, Virkon™ is of low toxicity, non-tainting, and non-irritant. Because of its high detergency and mode of action, Virkon™ can be used in an exceptional variety of situations for effective cleaning and virucidal disinfection in a single operation. Virkon™ can be applied manually or through all types of cleaning and spraying equipment. Readily soluble in lukewarm water giving a clear pink solution. Virkon™ consists mainly of inorganic salts. DIN 02125021 Active IngredientsPotassium monopersulfate 21.4% W/W Directions For Use
In agricultural buildings: animals must be removed from the premise during disinfection. In food processing plants: for food contact surfaces, rinse thoroughly with potable water after disinfection. 1. FOR CLEANING AND DISINFECTION OF SURFACES AND EQUIPMENT: In agricultural buildings Remove all animals from premises. Remove all litter and manure from floors, walls, and other surfaces of barns and equipment. Brush and blow dust from fans, motors, louvers and electrical equipment. For terminal cleaning and disinfection, saturate all surfaces with a 1% w/v solution of Virkon™, using a pressure washer or a fogger. Virkon™ should remain in contact with the surface to be disinfected for at least 10 minutes. Scrub heavily soiled utensils and soak in a 1% w/v solution of Virkon™ for 10 minutes (do not exceed 30 minutes for metal objects). In veterinary hospitals Remove heavy soil deposits then thoroughly wet surfaces to be disinfected with a 1% w/v solution of Virkon™, using a mop, sponge or cloth, as well as by spraying. A minimum contact time of 10 minutes is required. For laboratory equipment and bowls, scrub heavily soiled utensils and soak in a 1% w/v solution of Virkon™ for a minimum of 10 minutes (do not exceed 30 minutes for metal objects). IMPORTANT NOTE: In animal premises where there has been a disease outbreak and/or the mortality/morbidity rates are higher than normal and the causative agent has been determined by a pathology laboratory to be one of those listed in Table 1, the contact time/dilution rate indicated should be used. In food processing plants Remove all debris and other deposits from surfaces. Then, thoroughly wet surfaces to be disinfected with a 1% w/v solution of Virkon™, using a mop, sponge or cloth, as well as by spraying. A minimum contact time of 10 minutes is required. For food contact surfaces, rinse thoroughly with potable water after treatment with Virkon™. For a complete listing of microorganisms against which Virkon™ is effective, refer to the Efficacy Charts 2, 3, and 4. 2. FOR AERIAL DISINFECTION: To replace dangerous and ineffective formalin fumigation in empty farm buildings and veterinary hospitals. Shutdown the ventilation system during the disinfection. Use a mechanical fogging machine as part of terminal disinfection routine with a 1% w/v solution of Virkon™. Apply at a rate of one litre of solution per 100 m3 with particle size not exceeding 70 microns in order to get a minimal contact time of 10 minutes with microorganisms in the air. Leave the room during the fogging. Users and animals may re-enter the treated area once the fog has dispersed. No rinsing is required after fogging. 3. SANITIZING DRINKING WATER SYSTEM: For sanitizing drinking water system at terminal clean out, use a 1.0% w/v solution of Virkon™. Dose header tank and drain system. Wait at least 10 minutes before draining again. DILUTION INSTRUCTIONS1) Select the quantity of disinfectant solution required. 2) Choose appropriate dilution rate. 3) Measure out the amount of Virkon™ indicated using the graduated measuring scoop provided. 4) Add Virkon™ to warm water and stir. There is a 20% loss of activity of 1% solutions of Virkon™ after 14 days in 350 ppm hard water.Dilution rate required (w/v) Quantity of disinfectant solution required 3.0% 2.0% 1.0% 0.5% 0.2% Quantity of Virkon™ required 30 g 20 g 10 g 5 g 2 g 1 Litre 150 g 100 g 50 g 25 g 10 g 5 Litres 300 g 200 g 100 g 50 g 20 g 10 Litres 750 g 500 g 250 g 125 g 50 g 25 Litres Storage
Store between 15°C and 25°C in a dry place in tightly sealed containers.Disposal
1) Rinse the emptied container thoroughly and add the rinsings to treatment site. 2) Follow provincial instructions for any required additional cleaning of the container prior to its disposal. 3) Make the empty container unsuitable for further use. 4) Dispose of the container in accordance with provincial requirements. 5) For information on the disposal of unused, unwanted product and the cleanup of spills, contact the Provincial Regulatory Agency or the Manufacturer.Precautions
Keep out of reach of children. Powder irritating to eyes, skin and mucous membranes. May be harmful if swallowed or inhaled. Do not get powder in eyes. Avoid contact of powder with skin. Handle in such a way as to minimize dust release. Do not mix with other chemicals. When mixing the solution, wear goggles, chemical-resistant gloves, and a mask. It is recommended that workers wear overalls, goggles and a mask when applying Virkon™ solution with a hand-held fogger or a pressure washer.First Aid
Eyes: Irrigate with plenty of water. Skin: When in powder, remove contaminated clothing. Wash with soap and water. Not hazardous when in solution. Ingestion: When in powder, wash mouth with plenty of water. Drink plenty of water. Do not induce vomiting. Seek medical advice. If in solution, rinse mouth out with water. Inhalation: When in powder, if symptoms of coughing, choking, wheezing are troublesome, remove to fresh air and seek medical advice. MSDS -
For control of the lesser mealworm (the darkling beetles Alphitobius diaperinus) and other listed pests ACTIVE INGREDIENT: Tetrachlorvinphos - 50% w/w In case of spills, poisoning or fire, call your provincial emergency response line.DIRECTIONS FOR USE
Use Debantic 50WP as part of an overall integrated pest management (IPM) program. Debantic 50WP Insecticide Poultry and Livestock Premise Spray is suitable for use in conventional power or low pressure knapsack sprayers. Agitation is recommended to prevent undue settling of the suspension. Follow the USE DIRECTIONS for the proper percent solution needed for a specific insect and areas or types of wall surfaces. Refer to DILUTION TABLE for the quantity of insecticide needed to make the percent solution recommended. PREMISES USE DIRECTIONSPOULTRY USE DIRECTIONS (DO NOT APPLY TO RESIDENCES)INSECT PROBLEM AREAS % SOLUTION REMARKS Flies Dairy barns, poultry houses, swine barns, other animal buildings. 2.0% For dry whitewashed wood or concrete block surfaces, apply 8 litres of solution/100 sq. m. 1.0% For unpainted wood or painted concrete block surfaces, apply 8 litres of solution/100 sq. m. 1.0% For masonite or galvanized sheet metal surfaces, apply 4 litres of solution/100 sq. m. Maggots Poultry droppings, manure piles, garbage piles, under feed troughs 1.0% Apply 4 litres of solution/10 sq. m. Penetrate problem area first time - repeat every 7-10 days thereafter. DILUTION TABLEINSECT TYPE OF HOUSING % SOLUTION REMARKS Lice & Mites Wire Cages 0.5% Apply directly to birds (4 litres/100 birds). Spray vent and fluff areas from below. Repeat when necessary. Do not repeat more often than every 14 days. For individual bird treatment, apply 30 mL of the mixture per bird. NOTE: For maximum lasting control of the northern fowl mite, penetration of the feathers around the vent area is essential. Use power sprayer at 7-9 kg/sq cm at no less than recommended pressure. More attention must be given to each individual bird when using low-pressure equipment. Treat roosters carefully and thoroughly to avoid re-infestation in breeding flocks. Floor Management Dust Box 50% WP Mix evenly throughout top layer of box contents using 150 g/100 birds. Lice, Mite & Larvae and adults of the lesser mealworm (the darkling beetle, Alphitobius diaperinus) Floor Management Roost Paint 1.0% Treat with brush or spray thoroughly, particularly cracks and crevices using 145-165 mL/10 m. Floor Management Litter 1.0% Apply 1-4 litres/100 sq. m. evenly for penetration to litter surface. Also apply thoroughly to walls, roost, cracks, crevices and interiors. Spray birds lightly. Floor Management Litter 50% WP Treat evenly and thoroughly using 75 g/10 sq. m. Use a rotary or mechanical duster. (Wear dust mask during this operation). Fowl Tick All Types 1.0% Apply 3-4 litres/10 sq. m. thoroughly to walls, ceilings, floor cracks and crevices with a power sprayer. PRECAUTIONS KEEP OUT OF REACH OF CHILDREN AND LIVESTOCK. Harmful if swallowed or absorbed through skin. Avoid breathing spray mist and dust. Do not get in eyes, on skin, or on clothing. Wash thoroughly with soap and water after handling and before eating or smoking. Avoid contamination of feed and foodstuffs. Store apart from food and feed in a cool place. This product is toxic to fish. Do not contaminate water by disposal of this product. Do not re-use empty container. FIRST AID IF SWALLOWED: Call a poison control centre or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control centre or doctor. Do not give anything by mouth to an unconscious person. IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by mouth-to-mouth, if possible. Call a poison control centre or doctor for further treatment advice. IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control centre or doctor for treatment advice. IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses if present, after the first 5 minutes, then continue rinsing eye. Call a poison control centre or doctor for treatment advice. Take container, label or product name and Pest Control Product Registration Number with you when seeking medical attention. TOXICOLOGICAL INFORMATION Tetrachlorvinphos is a cholinesterase inhibitor. Typical symptoms of overexposure to cholinesterase inhibitors include headache, nausea, dizziness, sweating, salivation, runny nose and eyes. This may progress to muscle twitching, weakness, tremor, incoordination, vomiting, abdominal cramps and diarrhea in more serious poisonings. A life-threatening poisoning is signified by loss of consciousness, incontinence, convulsions and respiratory depression with a secondary cardiovascular component. Treat symptomatically. If exposed, plasma and red blood cell cholinesterase tests may indicate degree of exposure (baseline data are useful). Atropine, only by injection, is the preferable antidote. Oximes, such as Pralidoxime Chloride, may be therapeutic if used early; however, use only in conjunction with atropine. In cases of severe acute poisoning, use antidotes immediately after establishing an open airway and respiration. With oral exposure, the decision of whether to induce vomiting or not should be made by an attending physician. DISPOSAL 1. Triple-or pressure-rinse the empty container. Add the rinsings to the spray mixture in the tank. 2. Follow provincial instruction for any required additional cleaning of the container prior to its disposal. 3. Make the empty container unsuitable for further use. 4. Dispose of the container in accordance with provincial requirements. 5. For information on disposal of unused, unwanted product, contact the manufacturer or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill and for clean-up of spills. MSDSAMOUNT (kg) OF 50% WETTABLE POWDER AMOUNT OF WATER 0.5% SOLUTION 1% SOLUTION 2% SOLUTION 1/4 kg 25 litres 12 1/2 litres 6 1/4 litres 1 100 litres 50 litres 25 litres 2 200 litres 100 litres 50 litres 4 400 litres 200 litres 100 litres -
Jaguar All-Weather Bait Chunx contain the active ingredient Brodifacoum, Motomco's most powerful anticoagulant. Motomco's unique, proprietary extrusion process produces Bait Chunx with multiple edges that appeal to a rodent's desire to gnaw. Chunx are made with food-grade ingredients and small amounts of paraffin for a highly palatable bait. Jaguar Chunx are red in color and it's unique shape can be easily placed on rods in a bait station or secured using nails or wire. MSDS -
A flavoring agent for drinking water for swine, broilers, layers, turkeys and calves. Ingredients: Water, guar gum, origanum oil, xanthan gum. Directions for use: Mix Regano CL5 at the following rates per liter of stock solution. Note: One liter of stock solution needs to be metered with 128 liters of water.Swine Boars 20mL Sows 35mL Finishers 35mL Growers 50mL Starters 70mL Piglets 128mL Calves: (Up to 60kg body weight) 0.25 - 0.30 mL Regano CL5 Product Sheet *Pallet Pricing Available, Please Call for Details* *Pricing is Subject to Change*Poultry Broilers 50mL Layers 25mL Turkeys 45mL
