1.587.360.0898|info@ahpd.ca
  • pH test strips are simple yet effective tools for measuring the acidity or alkalinity of a solution. They consist of small strips of plastic with indicators that change color in response to variations in pH. When dipped into a liquid, the strip changes color according to the solution’s pH level, allowing you to quickly and easily determine the pH of the water.
    • 100 single-use strips conveniently packed into a moisture-wicking flip-up vial
    • Vivid color chart printed on the bottle enables easy determination of pH with increments of 1
    • Plastic Strips enable you to test a solution without the risk of touching the solution and eliminating the risk of finger staining
  • PLT® – More Than Ammonia Control

    PLT®-Poultry Litter Treatment has proven to be the most effective and economical litter acidifier available. The ammonia bound by PLT reduces environmental emissions and increases the nutrient value of poultry manure. Flexible. PLT can be used in any litter-based commercial poultry operation including those that grow broilers, breeders, turkeys, commercial pullets and layers, quail, pheasants and ducks. Easy & Safe Application. PLT can be applied using any type of spreader and it can be safely applied with birds in the house. Plus, PLT is the only litter amendment that is classified as non-hazardous by the DOT and non-corrosive. Fuel Savings. By immediately binding ammonia, PLT decreases ventilation needs, which reduces fuel costs. Valuable Poultry Manure. By turning volatile ammonia into stable ammonium sulfate, the value of the poultry manure increases. Backed by Experts. PLT® is backed by an expert team with decades of live production experience who understand the role litter management plays in animal welfare and performance. Let us help you develop BMPs for Precision Litter Management™ to address core environmental and health challenges. PLT Product Chemistry When PLT is applied it breaks down into sodium, hydrogen and sulfate. NaHSO–4 >  Na+  +  H+  +  SO–4 The hydrogen lowers pH and converts ammonia into ammonium. This ammonium then binds to the sulfate portion keeping ammonia bound in the litter for the life of the flock. PLT is a safe mineral acid that breaks down into products naturally found in the environment.

    Environmental Chemistry

    PLT is:
    • Biodegradable
    • Non-hazardous per current DOT standards
    • Ozone friendly
    PLT follows the principles of Green Chemistry as described by the EPA and the California Department of Toxic Substances Control:
    • The production process generates no waste and uses no solvents
    • The process is analyzed in real time to prevent pollution and maximizes “atom economy” by containing all of the starting materials in the final products
    • It is designed to be fully effective and has little toxicity
    • It degrades after use breaking down into innocuous substances
    • It is designed to minimize the potential for accidents including explosions, fires, and releases to the environment.
    PLT Information Sheet *Pricing is Subject to Change*
  • Proxy-Clean is a stabilized hydrogen peroxide based product specially formulated to remove and prevent heavy soils in livestock operations of any size.  Proxy-Clean utilizes a proprietary stabilizer that is an active ingredient not found in any other product. The stabilizers used in other hydrogen peroxide products just allow them to be shelf stable. Proxy-Clean’s proprietary stabilizer acts as a decomposition catalyst allowing Proxy-Clean to do a complete cleaning on water lines and watering systems. Active Ingredients
    Stabilized Hydrogen peroxide: 50% W/W.

    Directions For Use

    With Animals Present Mix Proxy-Clean with water to create the following stock solutions:
    Pump Water Proxy Clean
    Days 1 & 2 3 & 4 5 & 6 7-10
    1:100 20L 250mL 350mL 475mL 600mL
    1:128 20L 320mL 450mL 600mL 775mL
    Discontinue use of any medication, chlorine or sanitizer when administering Proxy Clean.  Resume the use of chlorine or other sanitizers after Proxy Clean treatment is finished. For routine sanitation use Proxy Clean at 25-50ppm in the drinking water (use test strips to measure concentration). Between 2 Lots/No Animals Present Fill the water lines with a Proxy Clean/water solution using the following options: Option 1: Use a 1:100 or 1:128 medicator to fill the water lines with a 1% or 0.78% solution of Proxy Clean.  Allow the solution to remain in the water lines for a minimum of 48 hours before flushing. Option 2: Use a 3:100 medicator to fill the water lines with a 3% solution of Proxy Clean.  Allow the solution to remain in the water lines for a minimum of 12 hours before flushing. When using Proxy Clean make sure that there is an adequate air release from your water system.

    Storage & Disposal

    Please refer to MSDS sheet.

    Precautions & First Aid

    Please refer to MSDS sheet. MSDS
  • PWT livestock water treatment contains the strongest animal feed grade mineral acid available. A much lower addition rate is required to acidify drinking water to low pH levels. This lower addition rate provides pH reduction with no bitter taste. Birds and livestock won’t back off from PWT treated water, so optimum water consumption is maintained. MSDS
  • The Quick-Mix pump is designed to accurately dose disinfectants through your water lines. The unique injection system makes it easy to dose disinfectants at 2 or 3% without having to worry about harsh chemicals wrecking diaphragms. To change the dilution ratio simply change the metering tip to the desired strength. Comes with tips for Proxy-Clean, Hyperox, Virocid and many other disinfectants. The quick-Mix is a wall mounted, push button dispenser.
    • Ideal for cleaning waterlines between flocks
    • Garden hose connection
    • Twist Lock
    • Compatible with most common chemicals
    • No power needed
    • No Diaphragms
    • Affordable, low maintenance unit
    • Flow Rate - requires at least (3.5GPM)
    • Compatible with chlorine, Hydrogen peroxide & more.
    Quick Mix Pump   *Pricing is Subject to Change*  
  • A flavoring agent for drinking water for swine, broilers, layers, turkeys and calves. Ingredients: Water, guar gum, origanum oil, xanthan gum. Directions for use: Mix Regano CL5 at the following rates per liter of stock solution.  Note: One liter of stock solution needs to be metered with 128 liters of water.
    Swine
    Boars 20mL
    Sows 35mL
    Finishers 35mL
    Growers 50mL
    Starters 70mL
    Piglets 128mL
    Poultry
    Broilers 50mL
    Layers 25mL
    Turkeys 45mL
    Calves: (Up to 60kg body weight) 0.25 - 0.30 mL Regano CL5 Product Sheet *Pallet Pricing Available, Please Call for Details* *Pricing is Subject to Change*  
  • This treatment applies to the following species: -Chickens -Turkeys CFIA Registration No T983937

    Guaranteed Analysis:

    Copper (min) 12.9 %, Sulfur (min) 6 %, Lead (max) 10.2 mg/kg, Arsenic (max) 4.1 mg/kg, Iron (max) 255 mg/kg

    List of Ingredients:

    Cupric Sulfate (as pentahydrate), USP, 51% w/w, Citric Acid

    Directions for Use

    Dissolve 500 g in 4L of drinking water as a premix (stock) solution. Then give this premix at the rate of 30 mL per 9L of water. Period of use as directed by a veterinarian. Prepare fresh solutions daily.

    Storage

    Keep in a cool dry place. Store below 25 ˚C. Keep from freezing.

    Caution

    Mix thoroughly. Only use according to instructions. Wear protective clothing when handling. Net Weight 10kg pail
  • Stalosan F is designed to uniquely meet the hygiene needs of the modern poultry industry. It kills a wide range of pathogens, including bacteria, viruses, fungi, parasites, and flies. Stalosan F also plays an important role in your birds’ environment as a litter conditioner. It is effective in improving air quality and neutralizing harmful substances such as ammonia and hydrogen sulfide. MSDS
  • For an outstanding, highly durable elastic-topped boot, the Treader™ line of disposable boots is the way to go.  The Treader™ boot’s unique pyramid-shaped treads not only increase wear and durability, they can also be an advantage on slipper surfaces where footing can be precarious.  The tread pattern more than triples the thickness of the sole of these disposable boots – the highest wear area and usually the first part of the boot to fail – making Treaders™ one of the most durable boots on the market.
  • Virkon™ is a disinfectant, possessing wide spectrum virucidal, bactericidal and fungicidal activity. The effectiveness of Virkon™ is further enhanced by its excellent detergent properties, so that clean disease-free surfaces can be achieved. Virkon™ is unique in its composition. Its activity is based on a buffered synergized acid peroxygen system containing a high percentage of surfactant. Virkon™ can be used on all surfaces and in all situations. Once diluted in a 1% solution, Virkon™ is of low toxicity, non-tainting, and non-irritant. Because of its high detergency and mode of action, Virkon™ can be used in an exceptional variety of situations for effective cleaning and virucidal disinfection in a single operation. Virkon™ can be applied manually or through all types of cleaning and spraying equipment. Readily soluble in lukewarm water giving a clear pink solution. Virkon™ consists mainly of inorganic salts. DIN 02125021 Active Ingredients
    Potassium monopersulfate 21.4% W/W

    Directions For Use

    In agricultural buildings: animals must be removed from the premise during disinfection. In food processing plants: for food contact surfaces, rinse thoroughly with potable water after disinfection. 1. FOR CLEANING AND DISINFECTION OF SURFACES AND EQUIPMENT: In agricultural buildings Remove all animals from premises. Remove all litter and manure from floors, walls, and other surfaces of barns and equipment. Brush and blow dust from fans, motors, louvers and electrical equipment. For terminal cleaning and disinfection, saturate all surfaces with a 1% w/v solution of Virkon™, using a pressure washer or a fogger. Virkon™ should remain in contact with the surface to be disinfected for at least 10 minutes. Scrub heavily soiled utensils and soak in a 1% w/v solution of Virkon™ for 10 minutes (do not exceed 30 minutes for metal objects). In veterinary hospitals Remove heavy soil deposits then thoroughly wet surfaces to be disinfected with a 1% w/v solution of Virkon™, using a mop, sponge or cloth, as well as by spraying. A minimum contact time of 10 minutes is required. For laboratory equipment and bowls, scrub heavily soiled utensils and soak in a 1% w/v solution of Virkon™ for a minimum of 10 minutes (do not exceed 30 minutes for metal objects). IMPORTANT NOTE: In animal premises where there has been a disease outbreak and/or the mortality/morbidity rates are higher than normal and the causative agent has been determined by a pathology laboratory to be one of those listed in Table 1, the contact time/dilution rate indicated should be used. In food processing plants Remove all debris and other deposits from surfaces. Then, thoroughly wet surfaces to be disinfected with a 1% w/v solution of Virkon™, using a mop, sponge or cloth, as well as by spraying. A minimum contact time of 10 minutes is required. For food contact surfaces, rinse thoroughly with potable water after treatment with Virkon™. For a complete listing of microorganisms against which Virkon™ is effective, refer to the Efficacy Charts 2, 3, and 4. 2. FOR AERIAL DISINFECTION: To replace dangerous and ineffective formalin fumigation in empty farm buildings and veterinary hospitals. Shutdown the ventilation system during the disinfection. Use a mechanical fogging machine as part of terminal disinfection routine with a 1% w/v solution of Virkon™. Apply at a rate of one litre of solution per 100 m3 with particle size not exceeding 70 microns in order to get a minimal contact time of 10 minutes with microorganisms in the air. Leave the room during the fogging. Users and animals may re-enter the treated area once the fog has dispersed. No rinsing is required after fogging. 3. SANITIZING DRINKING WATER SYSTEM: For sanitizing drinking water system at terminal clean out, use a 1.0% w/v solution of Virkon™. Dose header tank and drain system. Wait at least 10 minutes before draining again. DILUTION INSTRUCTIONS
    Dilution rate required (w/v) Quantity of disinfectant solution required
    3.0% 2.0% 1.0% 0.5% 0.2%
    Quantity of Virkon™ required
    30 g 20 g 10 g 5 g 2 g 1 Litre
    150 g 100 g 50 g 25 g 10 g 5 Litres
    300 g 200 g 100 g 50 g 20 g 10 Litres
    750 g 500 g 250 g 125 g 50 g 25 Litres
    1) Select the quantity of disinfectant solution required. 2) Choose appropriate dilution rate. 3) Measure out the amount of Virkon™ indicated using the graduated measuring scoop provided. 4) Add Virkon™ to warm water and stir. There is a 20% loss of activity of 1% solutions of Virkon™ after 14 days in 350 ppm hard water.

    Storage

    Store between 15°C and 25°C in a dry place in tightly sealed containers.

    Disposal

    1) Rinse the emptied container thoroughly and add the rinsings to treatment site. 2) Follow provincial instructions for any required additional cleaning of the container prior to its disposal. 3) Make the empty container unsuitable for further use. 4) Dispose of the container in accordance with provincial requirements. 5) For information on the disposal of unused, unwanted product and the cleanup of spills, contact the Provincial Regulatory Agency or the Manufacturer.

    Precautions

    Keep out of reach of children. Powder irritating to eyes, skin and mucous membranes. May be harmful if swallowed or inhaled. Do not get powder in eyes. Avoid contact of powder with skin. Handle in such a way as to minimize dust release. Do not mix with other chemicals. When mixing the solution, wear goggles, chemical-resistant gloves, and a mask. It is recommended that workers wear overalls, goggles and a mask when applying Virkon™ solution with a hand-held fogger or a pressure washer.

    First Aid

    Eyes: Irrigate with plenty of water. Skin: When in powder, remove contaminated clothing. Wash with soap and water. Not hazardous when in solution. Ingestion: When in powder, wash mouth with plenty of water. Drink plenty of water. Do not induce vomiting. Seek medical advice. If in solution, rinse mouth out with water. Inhalation: When in powder, if symptoms of coughing, choking, wheezing are troublesome, remove to fresh air and seek medical advice. MSDS
  • Virkon™ is a disinfectant, possessing wide spectrum virucidal, bactericidal and fungicidal activity. The effectiveness of Virkon™ is further enhanced by its excellent detergent properties, so that clean disease-free surfaces can be achieved. Virkon™ is unique in its composition. Its activity is based on a buffered synergized acid peroxygen system containing a high percentage of surfactant. Virkon™ can be used on all surfaces and in all situations. Once diluted in a 1% solution, Virkon™ is of low toxicity, non-tainting, and non-irritant. Because of its high detergency and mode of action, Virkon™ can be used in an exceptional variety of situations for effective cleaning and virucidal disinfection in a single operation. Virkon™ can be applied manually or through all types of cleaning and spraying equipment. Readily soluble in lukewarm water giving a clear pink solution. Virkon™ consists mainly of inorganic salts. DIN 02125021 Active Ingredients
    Potassium monopersulfate 21.4% W/W

    Directions For Use

    In agricultural buildings: animals must be removed from the premise during disinfection. In food processing plants: for food contact surfaces, rinse thoroughly with potable water after disinfection. 1. FOR CLEANING AND DISINFECTION OF SURFACES AND EQUIPMENT: In agricultural buildings Remove all animals from premises. Remove all litter and manure from floors, walls, and other surfaces of barns and equipment. Brush and blow dust from fans, motors, louvers and electrical equipment. For terminal cleaning and disinfection, saturate all surfaces with a 1% w/v solution of Virkon™, using a pressure washer or a fogger. Virkon™ should remain in contact with the surface to be disinfected for at least 10 minutes. Scrub heavily soiled utensils and soak in a 1% w/v solution of Virkon™ for 10 minutes (do not exceed 30 minutes for metal objects). In veterinary hospitals Remove heavy soil deposits then thoroughly wet surfaces to be disinfected with a 1% w/v solution of Virkon™, using a mop, sponge or cloth, as well as by spraying. A minimum contact time of 10 minutes is required. For laboratory equipment and bowls, scrub heavily soiled utensils and soak in a 1% w/v solution of Virkon™ for a minimum of 10 minutes (do not exceed 30 minutes for metal objects). IMPORTANT NOTE: In animal premises where there has been a disease outbreak and/or the mortality/morbidity rates are higher than normal and the causative agent has been determined by a pathology laboratory to be one of those listed in Table 1, the contact time/dilution rate indicated should be used. In food processing plants Remove all debris and other deposits from surfaces. Then, thoroughly wet surfaces to be disinfected with a 1% w/v solution of Virkon™, using a mop, sponge or cloth, as well as by spraying. A minimum contact time of 10 minutes is required. For food contact surfaces, rinse thoroughly with potable water after treatment with Virkon™. For a complete listing of microorganisms against which Virkon™ is effective, refer to the Efficacy Charts 2, 3, and 4. 2. FOR AERIAL DISINFECTION: To replace dangerous and ineffective formalin fumigation in empty farm buildings and veterinary hospitals. Shutdown the ventilation system during the disinfection. Use a mechanical fogging machine as part of terminal disinfection routine with a 1% w/v solution of Virkon™. Apply at a rate of one litre of solution per 100 m3 with particle size not exceeding 70 microns in order to get a minimal contact time of 10 minutes with microorganisms in the air. Leave the room during the fogging. Users and animals may re-enter the treated area once the fog has dispersed. No rinsing is required after fogging. 3. SANITIZING DRINKING WATER SYSTEM: For sanitizing drinking water system at terminal clean out, use a 1.0% w/v solution of Virkon™. Dose header tank and drain system. Wait at least 10 minutes before draining again. DILUTION INSTRUCTIONS
    Dilution rate required (w/v) Quantity of disinfectant solution required
    3.0% 2.0% 1.0% 0.5% 0.2%
    Quantity of Virkon™ required
    30 g 20 g 10 g 5 g 2 g 1 Litre
    150 g 100 g 50 g 25 g 10 g 5 Litres
    300 g 200 g 100 g 50 g 20 g 10 Litres
    750 g 500 g 250 g 125 g 50 g 25 Litres
    1) Select the quantity of disinfectant solution required. 2) Choose appropriate dilution rate. 3) Measure out the amount of Virkon™ indicated using the graduated measuring scoop provided. 4) Add Virkon™ to warm water and stir. There is a 20% loss of activity of 1% solutions of Virkon™ after 14 days in 350 ppm hard water.

    Storage

    Store between 15°C and 25°C in a dry place in tightly sealed containers.

    Disposal

    1) Rinse the emptied container thoroughly and add the rinsings to treatment site. 2) Follow provincial instructions for any required additional cleaning of the container prior to its disposal. 3) Make the empty container unsuitable for further use. 4) Dispose of the container in accordance with provincial requirements. 5) For information on the disposal of unused, unwanted product and the cleanup of spills, contact the Provincial Regulatory Agency or the Manufacturer.

    Precautions

    Keep out of reach of children. Powder irritating to eyes, skin and mucous membranes. May be harmful if swallowed or inhaled. Do not get powder in eyes. Avoid contact of powder with skin. Handle in such a way as to minimize dust release. Do not mix with other chemicals. When mixing the solution, wear goggles, chemical-resistant gloves, and a mask. It is recommended that workers wear overalls, goggles and a mask when applying Virkon™ solution with a hand-held fogger or a pressure washer.

    First Aid

    Eyes: Irrigate with plenty of water. Skin: When in powder, remove contaminated clothing. Wash with soap and water. Not hazardous when in solution. Ingestion: When in powder, wash mouth with plenty of water. Drink plenty of water. Do not induce vomiting. Seek medical advice. If in solution, rinse mouth out with water. Inhalation: When in powder, if symptoms of coughing, choking, wheezing are troublesome, remove to fresh air and seek medical advice. MSDS
  • Virocid is a highly concentrated and broad spectrum disinfectant for use in food processing establishments, slaughter houses and livestock industries. Virocid is effective against: viruses, bacteria and fungi.  Effective at rates as low as 0.25% (1:400). DIN 02239726 Active Ingredients
    Alkyl (40% C12, 50% C14, 10% C16) dimethyl benzyl ammonium chloride 17.06%
    Didecyl dimethyl ammonium chloride 7.80%
    Glutaraldehyde 10.725%

    Directions For Use

    To disinfect hard non-porous surfaces (livestock equipment, floors, walls, table tops, counter tops), apply a 0.25% (1:400) solution to thoroughly wet surface. Spray the surface and let stand for 10 minutes. Virocid is a concentrate that can be used with a mop and bucket, trigger sprayers, sponge, or by soaking. Heavily soiled surfaces should be precleaned prior to disinfection. All food contact surfaces must be thoroughly rinsed with potable water after disinfection.

    Storage

    Store in original container, in a dry, cool place. Do not store in food processing environments.

    Disposal

    1. Rinse the emptied container thoroughly and add the rinsings to the treatment site. 2. Follow local instructions for any required additional cleaning of the container prior to disposal. 3. Make the empty container unsuitable for further use. 4. Disposal of product and packaging: The product and packaging must be disposed of in accordance with local requirements.

    Precautions

    KEEP OUT OF REACH OF CHILDREN. Danger - Corrosive to eyes. Do not get in eyes, on skin or clothing. Use appropriate clothes, gloves and eye protection. Harmful if swallowed. Avoid contamination of food.

    First Aid

    In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. For eyes, call a physician. Remove and wash contaminated clothing before reuse. If inhaled, breathe fresh air and consult a physician. If swallowed, do NOT induce vomiting. Call a physician or poison control centre immediately. MSDS
  • Virocid is a highly concentrated and broad spectrum disinfectant for use in food processing establishments, slaughter houses and livestock industries. Virocid is effective against: viruses, bacteria and fungi.  Effective at rates as low as 0.25% (1:400). DIN 02239726 Active Ingredients
    Alkyl (40% C12, 50% C14, 10% C16) dimethyl benzyl ammonium chloride 17.06%
    Didecyl dimethyl ammonium chloride 7.80%
    Glutaraldehyde 10.725%

    Directions For Use

    To disinfect hard non-porous surfaces (livestock equipment, floors, walls, table tops, counter tops), apply a 0.25% (1:400) solution to thoroughly wet surface. Spray the surface and let stand for 10 minutes. Virocid is a concentrate that can be used with a mop and bucket, trigger sprayers, sponge, or by soaking. Heavily soiled surfaces should be precleaned prior to disinfection. All food contact surfaces must be thoroughly rinsed with potable water after disinfection.

    Storage

    Store in original container, in a dry, cool place. Do not store in food processing environments.

    Disposal

    1. Rinse the emptied container thoroughly and add the rinsings to the treatment site. 2. Follow local instructions for any required additional cleaning of the container prior to disposal. 3. Make the empty container unsuitable for further use. 4. Disposal of product and packaging: The product and packaging must be disposed of in accordance with local requirements.

    Precautions

    KEEP OUT OF REACH OF CHILDREN. Danger - Corrosive to eyes. Do not get in eyes, on skin or clothing. Use appropriate clothes, gloves and eye protection. Harmful if swallowed. Avoid contamination of food.

    First Aid

    In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. For eyes, call a physician. Remove and wash contaminated clothing before reuse. If inhaled, breathe fresh air and consult a physician. If swallowed, do NOT induce vomiting. Call a physician or poison control centre immediately. MSDS

Title

Go to Top